Barrel-Style Tile

FMRP Receives Florida Product Approval for .032″ Barrel Style Aluminum Tile

May 2013

The design concept behind the NEW .032” Barrel Style Aluminum Tile Roofing is unique. In an effort to manufacturer an aluminum product with superior uplift characteristics “you have to think outside the box”.

Even though the panel profile is identical to the 24-Gauge Steel System. The concept for the .032” Aluminum Tile Roofing System is completely different.

The panel was narrowed to a 27-inch coverage wide which eliminated all side-lap attachments. Panels are manufactured in various lengths up to 8’-6. The panels are easily installed with one or two installers. The panels are attached to the deck with #9-15 x 1-1/2” lg. Stainless Steel Screws in a FIELD screw pattern. This concept allowed us to achieve a FIELD design pressure of -127.50 PSF, which meets the 2014 FBC for 200 MPH.

Updated: July 14, 2017 — 7:47 am

FMRP chosen for “Hurricane Hardened” Design at Saint Leo University

August 2011

This is the first new academic building in the last 40 years on the campus and Saint Leo University has entrusted Lunz Prebor Fowler Architects with the programming and design of this 45,000 square foot, four story building. Our Barrel Style Metal Tile Roofing System was chosen due to its extreme uplift characteristics. In the event of a hurricane, the School of Business facility is intended to be the “safe shelter” for all students and faculty on campus.

The New School of Business is planned to be a minimum of LEED Silver certification by the USGBC.

St. Leo University

Updated: July 21, 2014 — 6:29 pm

The Diocese of Venice chooses FMRP for The Church of Saint Patrick in Sarasota

April 2011

The original concrete tile roof at The Church of Saint Patrick Church in Sarasota has been leaking for years. After investigating the benefits of several products including Standing Seam, our Barrel Style Metal Tile was chosen because of its Classic Tile look and unmatched uplift resistance. The original contract to replace the Sanctuary Roof was given to Crowther Roofing & Sheet Metal of Florida. The pastor and elders were so impressed with the quality of our metal tile and the workmanship of Crowther Roofing, that an additional contact was executed for the re-roof of the adjacent Parrish Hall.

Dark Ivy was chosen for the 41,800 Square Feet excluding the complimenting Tapered Standing Seam that was installed over the main sanctuary entrance.

st. patricks 03 4-22-11 (2)

Updated: July 21, 2014 — 6:25 pm

FMRP Issued Florida State Product Approval

April 2011

In addition to our Miami-Dade County NOA No. 11-0309.03, FMRP has been issued a Florida State Product Approval for our 24-Gauge Barrel Style Metal Tile Roofing System. This approval will make it easier for our customers to pull permits in municipalities that don’t have the resources to issue local permits.

Updated: November 12, 2011 — 4:28 pm

FMRP receives Energy Star Approval for 17 solar reflective colors

October 2009


Florida Metal Roofing Products, Inc., the manufacturer of the industry’s strongest metal tile roofing system engineered to 312 MPH, announces that 17-seventeen of our Solar Reflect colors meet a requirement for Energy Star compliance. Federal Tax Credits for Energy Efficiency through the Economic Stabilization Act of 2008 include metal roofing with Energy Star Compliance. These tax credits are available at 30% of the cost of the roof, up to $1,500, in 2009 & 2010 (for existing homes only).

Colors include: Almond, Bone White, Champagne Metallic, Charcoal Gray, Cityscape, Classic Copper, Colonial Red, Dark Ivy, Hemlock Green, Patina Green, Regal Red, Sandstone, Sierra Tan, Silver Metallic, Stone White, Terra Cotta, and Tropical Patina.

Updated: July 21, 2014 — 6:24 pm

FMRP makes the cover of Metal Roofing Magazine

August 2009

Metal Roofing Magazine

The Ocean Village Condominiums in Key Biscayne, Florida was ready for a change to their existing flat concrete tile roofs. “The cost of metal actually worked out to be a little less expensive than replacing with the existing concrete tile” said Michael Jacobazzi of Roofing Concepts Unlimited. “The association was looking for a high quality, wind resistant roof and that’s what we are installing”.

“Our Barrel Style Metal Tile is the industry’s strongest metal tile roofing system with a field design criteria of -204.25 PSF, none of our competitors come close!” says Daniel John, President of Florida Metal Roofing Products, Inc.

“This 1,000 square project was completed in 5 months nearly 1 month ahead of schedule” says Michael Jacobazzi of Roofing Concepts Unlimited. “In addition, Ocean Village Condominiums received a 24% reduction in their insurance premiums with Citizens Insurance” says John Grotta, the President of the Association.

Updated: July 21, 2014 — 6:22 pm

FMRP announces a NEW SPLATTER COAT color “Mission Red”

July 2009


Click Here for our Trifold

Florida Metal Roofing Products, Inc. is the manufacturer of the industry’s strongest metal tile roofing system engineered to 312 MPH. Announces the introduction of a new color “Mission Red” in an embossed panel. This new “Mission Red” color is manufactured with a 70% Fluropon Kynar 500™ Paint System that includes a Primer Base Coat, Terra Cotta Finish Coat, and a patterned Black Finish Coat that gives our panel a strong definition of color.

“We developed this color to compete with the stone-coated products in the market,” says Daniel John, President of Florida Metal Roofing Products, Inc. “This new paint system adds true definition to our large metal tile profile and doesn’t require the maintenance that stone-coated products do.” “We are excited to offer this new product that truly resembles a Concrete Tile.”

Updated: July 21, 2014 — 6:18 pm
Florida Metal Roofing Products, Inc. © 2014-2017 Frontier Theme